Use this window or tab to perform a final conformance check for your overhaul object (i.e., work order part). The purpose of a final conformance check is to determine if the approved work scope has been executed according to the given configuration rules.
When all tasks included in the selected work scope have been signed off, this final conformance check can be initiated manually. To do so, right-click and click Run Final Conformance Check on this tab. In addition to the validation checks which are performed when a serial structure (from IFS/Vehicle Information Management) is set to the Operational status, the final conformance check will verify that Life Limited Parts (LLPs) and Modifications exist as per the work scope requirements.
Each error or warning discovered through the final conformance check is displayed in this tab. These generated records must be corrected before your overhaul object can be set operational. Alternatively, you have the option of manually approving the generated error(s) or warning(s) as follows:
Ideally, once you have corrected and/or approved the errors and warnings, it is recommended that you perform the conformance check again. This is to ensure that all errors and warnings have been corrected. Note: You may need to run this final conformance check a number of times before all errors and warnings are corrected.
The following table shows the valid error categories used to identify the type of error for the generated records:
| Error Category | Description |
| Alternates Violation |
|
| Missing Minimum Config Part | The structure is not complete. It does not match the minimum configuration defined in the template standard structure. The part is missing in the current serial structure. |
| Missing Serial Number | The structure is not complete. The serial number is missing for the part with a part number. |
| Dependency Violations | The part with a part number and serial number installed in a certain structure position does not fulfill its required dependencies against another structure position. |
| Remaining Life Too Short | The remaining life for the LLP does not meet the requirements for minimum release life as defined in Shop Visit/Visit Defaults/Min Release Life Definition. The Rem Life Oper Param field will retain the operational parameter that did not meet the requirements. |
| Modification Not Complied on Assigned Part | There are no history records for the assigned serial with a part number and serial number for the compliance of a modification (illustrated by the values in the Modification Code and Modification Revision fields.) |
| Modification Not Decomplied on Assigned Part | There are no history records for the assigned serial with a part number and serial number for the decompliance of a modification (illustrated by the values in the Modification Code and Modification Revision fields.) |
| Modification Not Complied on Affected Part | There are no history records for the affected serial with an affected part number and a affected serial number for the compliance of a modification (illustrated by the values in the Modification Code and Modification Revision fields.) |
| Modification Not Decomplied on Affected Part | There are no history records for the affected serial with an affected part number and a affected serial number for the decompliance of a modification (illustrated by the values in the Modification Code and Modification Revision fields.) |
| Missing On Exposure Modification | The On Exposure Modification for the disassembled serial(s) is not included in the relevant work scope. |
| Missing On Repair Modification | The On Repair Modification for the serial(s) is not included in the relevant work scope. |
| Missing On Scrap Modification | The On Scrap Modification for the serial(s) is not included in the relevant work scope. |
| Invalid Structure Status | The operational status (Planned For Operation) of the serial structure is invalid. |
| Unresolved Mismatches | Structure mismatches exist. |
| Serial does not exist in VIM | The serial does not exist in IFS/Vehicle Information Information Management. |
| General LLP Problem |
|
| Overdue Mandatory Modifications | Overdue mandatory modifications exist. |