Remove Connection to Subtask

Explanation

This activity is used to remove a subtask from an instruction. Subtasks are connected to the instruction in the Instruction/Subtask/Subtasks sub tab. You can choose to only remove the connection between the subtask and instruction or to remove both the connection and the subtask in this activity.

Prerequisites

• Subtasks must be connected to the instruction which in turn is connected to task codes (i.e., maintenance codes, condition limits, modifications, fault functions and life limits).
• If the subtask is to be removed, detailed data (e.g., a connected material or a zone) should not be connected to it.

System Effects

As a result of this activity, the connection to the subtask is removed from the instruction. If specified, the connected subtask will be removed from the system.

Window

Instruction   

Related Window Descriptions

Instruction 
Instruction/Subtasks/Subtask

Procedure

1. Open the Instruction window.
2. Populate (F2) or query (F3) for the necessary instruction.
3. Click the Subtasks tab and then click the Subtasks sub tab.
4. Select the row for the connection you want removed, right-click, and then click Remove Connection. The Remove Connection dialog box opens.
5. If you only want to remove the connection to the subtask, click OK.
6. If you want to remove both the connection and the subtask itself, select the Remove connection and the instruction or the subtask check box. Note: If the subtask that is to be removed is included in a sequence, the Sequencing is defined and will be removed check box will be selected automatically.
7. Click OK.