Report Return for Rework

Explanation

Inspection results can be entered for inventory registered purchase parts, non-inventory registered purchase parts, and no-number parts. This must be done when the quantity to inspect is larger than zero (0). For inventory parts, you must enter the inspection results before you are allowed to move the parts into a stock location. For non-inventory parts or no-number parts, the results must be entered to complete the receipt. Use of serial numbers affect the handling.

You can enter the inspection results via Receipt (and some related tabs) or Inspection Management; both windows lead to the same dialog box. Inspection results can be reported, regardless of the parts' location, i.e., in an arrival, inspection, or stock location.

If you are using IFS/Quality Management and have created an analysis, tested the parts in question, and reported the results in this component, you can use these results as a guideline when you enter the inspection results and return parts for rework, in the receipt function. 

When you enter the inspection results, faulty parts can be returned for rework. The return cause can, for example, be problems with the quality. The financial burden of returned parts is placed on the supplier, i.e., the parts need to be reworked. When parts are returned for modification, they are counted as a backorder; you can do arrival registration after the modification is done.

A return for rework is normally entered per return cause in the appropriate tab when entering the inspection results. You can specify several return causes for a receipt line. Do this by entering one line for each return cause. Example: You have a receipt line with ten parts. Six parts are entered as approved, one part is returned by the return cause A on one line, and three parts are returned by the return cause B on a second line. To make a full report, the sum of the quantity approved and any quantities scrapped or returned should be the same as the quantity to inspect. Otherwise, you have done a partial report of the inspection results. Note that for catch unit enabled parts, you must specify the return catch quantity for rework. 

When you are returning several lines with the same return cause on a receipt line, such as serial numbered parts, it is time-consuming to enter a new line and specify the return cause for each serial number. Instead, you can select all lines in question in Receipt/Details and specify the return cause in advance by right-clicking and then clicking Return Receipt Lines. A dialog box opens and you can specify a return cause for all selected lines. You also must choose the return type Return Rework. When this is completed, the dialog box for entering the inspection result opens with the return cause specified per serial number already filled in in the proper tab. You can remove a line that is selected by mistake. It is also possible to change the return cause on a single line.

Once you perform the return, the parts will be included in a new supplier shipment, alternatively you have the option to connect the returns to already existing supplier shipments as long as these have not been picked. You need to go through the supplier shipment process in order to deliver parts to your supplier, but for a quick return the finalize shipment option can be used when registering results.

If you, for some reason have planned returns to a supplier shipment by mistake, you can undo this action from the supplier shipment level before it is being delivered. If you would like to undo this action after the delivery of a supplier shipment, you can do this on the receipt level. When a return is undone, you must enter an inspection result on the receipt before this can be processed in the work flow.

Note: Rentals cannot be returned as rework/credit and/or scrap during purchase order inspection.

Prerequisites

System Effects

Window

Receipt
Inspection Management

Related Window Descriptions

Register Result
Register Result/Return
Inspection Management
Receipt

Receipt/General
Receipt/Details
Return Cause

Procedure

Report inspection results and return parts for rework.

  1. Either populate or query for the order number in question. If you have several receipts for an order you also must select the correct receipt number in the Receipt window.
  2. Right-click and then click Register Inspection Results. The Register Result dialog box opens.
  3. Enter the approved quantity in the Approve field. You can choose to specify this in the source or inventory unit of measure. The corresponding field reflects the quantity in the other unit of measure. Click Apply to save this entry.
  4. Select the Return tab, and then click New.
  5. Enter the quantity returned. You can specify this in either source or in inventory unit of measure. The corresponding column reflects the quantity in the other unit of measure. When you return serial numbered parts, the quantity returned should always be 1.
  6. Specify a return cause. Either enter a short code or search for it by clicking List.
  7. Indicate the return type Return Rework by using the list in the relevant column.
  8. For inventory registered parts, specify the location number of the desired warehouse by clicking List. You can choose only from among the current locations for this receipt line. If you are returning a specific serial numbered part, a part from a particular lot or batch, or a part with another revision number, search for the part info by clicking List or enter the identity in the relevant field. This column is not used in connection with non-inventory registered purchase parts or no-number parts.
  9. If you are returning parts and want to specify several return causes, enter new lines by clicking New.
  10. Click OK.
  11. If you are returning parts for a receipt line that has been reopened after it has been received into stock, and the part is serial tracked at receipt and issue but not serial tracked in inventory, then a dialog box appears where the serial numbers to be returned should be identified. Click OK when completed.

Specify the return cause for several lines and then enter the inspection results:

  1. Either populate or query for the desired order number. If you have several receipts for an order, you also must select the correct receipt number in the Receipt window.
  2. Select the Receipt/Details tab.
  3. Select the desired lines.
  4. Right-click and then click Return Receipt Lines and a dialog box is displayed. Indicate the return cause by clicking List. Select the return type Return Rework by using the list. Click OK.
  5. The Register Result dialog box automatically opens. The return cause is indicated on each line, and the quantity returned is automatically filled in. If a line is displayed that you do not intend to return, select it and remove it by using the Remove button. In this case, update the quantity in the Approve field.
  6. Click OK.
  7. If you are returning parts for a receipt line that has been reopened after it has been received into stock, and the part is serial tracked at receipt and issue but not serial tracked in inventory, then a dialog box appears where the serial numbers to be returned should be identified. Click OK when completed.