Modify Task Cards for Fault

Explanation

This activity is used to modify the task cards that are connected to a fault. These are the task cards that will be executed when the fault is repaired.

When a fault is reported, the standard task cards which are connected to the given product model and fault function will be copied to the fault. One or more of these standard task cards may not be applicable for the repair of a particular fault and therefore can be removed from the fault using this activity. Furthermore, if needed, you can add new task cards to the fault. Note: You can only add the task cards that are defined for the part revision of the serial on which the fault was reported.

When a fault is distributed to a work order, the task cards, subtasks, resources, and material which are entered on the fault will be transferred to the work order. A work task is created for each task card or subtask. If a new task card is added to the fault after the creation of the work order, a work task will be added for this task card.

Prerequisites

• Task cards must have been connected to the product model and fault function. For more information refer the online help file Define where Task Cards should be used.
• Task cards must exist for the part number/revision of the serial on which the fault is reported.
• If the fault is connected to a maintenance order, and is in the Incomplete status or a higher status, it is not be possible to modify the task cards of the fault. Instead, you need to add or remove (cancel) task cards for the fault event directly on the maintenance order.

System Effects

• Standard task cards are copied to the fault and modified according to the required repair actions for the fault.
• New task cards are added to the fault.

Window

Serial Operational Information

Related Window Descriptions

Serial Operational Information
Serial Operational Information/Fault
Serial Operational Information/Fault/Task Cards
Reset to Standard Task Cards

Procedure

Use the following procedure to add a new task card to the fault:

1. Open the Serial Operational Information window and query (F3) for the part or serial on which the fault was reported.
2. Click the Fault tab and select the relevant fault number from the values given in the Fault Number list.
3. Click the Task Cards tab and create a new record (F5).
4. In the Task Card ID field, enter the ID of the required task card you want. Use the List of Values to select a value.
5. Save the record (F12).

Use the following procedure to remove a standard task card from the fault:

1. Open the Serial Operational Information window and query (F3) for the part or serial on which the fault was reported.
2. Click the Fault tab and select the relevant fault number from the values given in the Fault Number list.
3. Click the Task Cards tab.
4. Select the row that holds the task card to be removed, and click Remove.
5. Save the record (F12).

Use the following procedure to update the existing task card list by using the Reset to Standard Task Cards dialog box:

1. Open the Serial Operational Information window and query (F3) for the part or serial on which the fault was reported.
2. Click the Fault tab and select the relevant fault number from the values given in the Fault Number list.
3. Click the Task Cards tab.
4. Right-click and then click Reset to Standard Task Cards. The Reset to Standard Task Cards dialog box appears.
5. Select the Remove Generated Records check box if you want to remove previously generated task card records (and thereby add new task cards to the serial fault). This check box is selected by default and can be updated.
6. Select the Remove Manual Records check box if you want to remove all task card records that were manually added to the fault. This check box is selected by default and can be updated.
7. Click OK to close the dialog box and update the task card list.