Create MRB Case

Explanation

Use this activity to report a detected non-conformance or defect of a raw material, part, component, or product, thus creating a Material Review Board (MRB) case. Any item that does not conform to the governing specification, drawing, or other approved product description can be reviewed through the MRB. The non-conformance can include discrepancies such as expired parts, physical appearance not up to standard, parts not fitting properly etc.

The specific type of non-conformance is entered in the Create MRB Case dialog box along with a specific availability control which is set to isolate or freeze the parts and prevent them from being available for use. A non-conformance can be reported for an individual part or for a whole batch of the same lot number, or just for a serial number. A Material Review Board case can be generated against on-hand material in a purchase order receipt, a shop order receipt, shop order work in process (WIP) or a shop order material.

Prerequisites

For the Shop Order, Shop Orders, Production Line Management/Shop Orders, Report Work Center Operation, Report Shop Order Operation, Shop Floor Workbench windows:

For the Inventory Part In Stock window:

For the Receipts and Receipt windows:

For the Inspection Management window:

System Effects

Window

Shop Order
Shop Orders
Production Line Management
Shop Order Materials
Work Center Operations Reporting
Shop Order Operations Reporting
Shop Floor Workbench
Inventory Part in Stock
Inspection Management
Receipts
Receipt

Related Window Descriptions

Create MRB Case
Shop Order
Shop Order/Operations
Shop Orders
Production Line Management
Production Line Management/Shop Orders
Shop Order Materials
Report Work Center Operation
Report Shop Order Operation
Shop Floor Workbench
Inventory Part in Stock
Inspection Management
Receipts
Receipt

Procedure

From the Inventory Part In Stock, Inspection Management, Receipts or Receipt window:

  1. Open one of the windows mentioned above and search for the desired part.
  2. Right-click and then click Create MRB Case. The Create MRB Case dialog box appears. 
  3. Optionally, you can enter the ID for the MRB case in the Case ID field. If a value is not entered in this field, the system will automatically generate a sequence. 
  4. Optionally, you can enter the description in the Case Description field.
  5. Enter the non-conformance code in the Nonconform Code field, or select one from the List of Values.   
  6. Optionally, you can select the Print Labels check box if you want to print labels to identify the parts being reviewed by the MRB. The value selected will be automatically proposed the next time the dialog box is opened.
  7. Enter the availability control ID in the Availability Control ID field. This will prevent those parts from being used while they are handled by the MRB.        
  8. Enter the quantity that needs to be inspected by the MRB in the MRB Quantity field.
  9. Click OK.

From the Shop Order, Shop Orders, Production Line Management/Shop Orders, Shop Order Materials, Report Work Center Operation or Report Shop Order Operation window:

  1. Search for the desired shop order or work center in any of the windows mentioned above.
  2. Select a material or operation record and right-click, or right-click anywhere in the header, point to Material Review Board and then click Create. The Create MRB Case dialog box appears. 
  3. Optionally, you can enter the ID for the MRB case in the Case ID field. If a value is not entered in this field, the system will automatically generate a sequence. 
  4. Optionally, you can enter the description in the Case Description field.
  5. Enter the non-conformance code in the Nonconform Code field, or select one from the List of Values.   
  6. Optionally, you can select the Print Labels check box if you want to print labels to identify the parts being reviewed by the MRB. The value selected will be automatically proposed the next time the dialog box is opened.    
  7. Enter the quantity that needs to be inspected by the MRB in the MRB Quantity field.
  8. Click OK.

From the Shop Floor Workbench window:

  1. Select the shop order operation to create a material review board case against.
  2. Click Create MRB, the Create MRB Case dialog box appears. 
  3. Optionally, you can enter the ID for the MRB case in the Case ID field. If a value is not entered in this field, the system will automatically generate a sequence.  
  4. Optionally, you can enter the description in the Case Description field.
  5. Enter the non-conformance code in the Nonconform Code field, or select one from the List of Values.   
  6. Optionally, you can select the Print Labels check box if you want to print labels to identify the parts being reviewed by the MRB. The value selected will be automatically proposed the next time the dialog box is opened.     
  7. Enter the quantity that needs to be inspected by the MRB in the MRB Quantity field. If the Default Quantity to Report check box is selected in the Site/Extended Site Info/Manufacturing/General window, the available operation quantity is automatically proposed, else you must manually entered the quantity.
  8. Click OK.

Note: You can subsequently use the MRB Case window to change header information and edit individual disposition items as long as their status is not Completed or Canceled. To do so, right-click anywhere in the window, point to Material Review Board and then click View. The MRB Case window will open and you can make changes accordingly.