Define Material for Task Card
and Subtask
Explanation
This activity is used to register material requirements for a task card or
subtask. Material can be components for
replacement and/or dispensable parts such as nuts and bolts. There can be
material that will not be used every time a task card or subtask
is performed. For such material, you can specify how likely it is that the
part will be used by entering a probability percentage on the relevant
material line.
The parts on the material list are not connected to a
site at this point since you may not know which workshop will perform the work.
The material list is connected to a site when the corresponding task card or
subtask is added to a maintenance order.
Prerequisites
- A task card or subtask must be defined.
- The part revisions that are to be included in the material
list must be defined as engineering part revisions. Vehicle parts are not
allowed.
- If the material is to be supplied by a particular manufacturer and/or be a specific part number from the manufacturer,
this manufacturer and the corresponding
manufacturer's part number must be entered for each part in the material
list.
System Effects
- Material requirements are defined for a task card or subtask.
- When the maintenance event to which the task card or subtask is
connected is transferred, a work task is created per task card and subtask
and the material demand is copied to the task.
Window
Task Card
Subtask
Task Cards per
Maintenance Code
Modification
Details
Condition
Monitoring Program
Task Cards
per Fault Function
Serial Part Revision
Post
Maintenance Check Definition
Related Window Descriptions
Task Card
Task Card/Material List
Subtask
Subtask/Subtask
Subtask/Material List
Task Cards per Maintenance
Code
Task Cards per Maintenance
Code/Material Usage
Modification Details
Modification Details/Execution Type
Info
Modification
Details/Execution Type Info/Material Usage
Condition Monitoring Program
Condition Monitoring
Program/Condition Category Info
Condition Monitoring
Program/Condition Category Info/Material Usage
Task Cards per Fault
Function
Task Cards per Fault
Function/Material Usage
Serial Part Revision
Serial Part Revision/Life Limit
Serial Part Revision/Life Limit/Material Usage
Post Maintenance Check Definition
Post Maintenance Check
Definition/Part Revision Info
Post Maintenance Check
Definition/Part Revision Info/Material Usage
Procedure
Use the following procedure to create a material line
using the part revision for which the task card is valid:
- Open the Task Card
window.
- Search for the desired task card revision.
- Click the
Material List tab and
create a new record (F5).
- In the Sub Part Number field, enter the
part number of the part that is to be included in the material list. Use the
List of Values to select a value.
- When the sub part number is selected, a value in
the Sub Part Revision field appears automatically. If this is not the
required sub part revision, use the List of Values to select another value.
- If the part is to be supplied by a manufacturer, enter the
manufacturer's number in the Manufacturer Number field. Use
the List of Values to select a value.
- If the part is to be supplied with a specific
manufacturer's part number, enter the value in the Manufacturer's Part
No field. Use the List of Values to select a value.
- In the Planned Quantity field, enter the quantity of material
(i.e., the selected part) that is to be used during the execution of the task card.
- If the part will not be used every time the task card is executed, enter the probability
(as a percentage) of the part being needed in the Probability field.
- Save the record (F12).
Use the following procedure to create a material line
using the manufacturer's part number:
- Open the Task Card
window and
query for your part revision.
- Click the
Material List
tab and
create a new record (F5).
- In the Manufacturer's Part No field, enter
the manufacturer's part number that is to be included in the material list.
Use the List of Values to select a value.
- The corresponding sub part revision information
appears automatically in the Sub Part Number and Sub Part Revision
fields. If needed, use the List of Values to select another sub part
revision in the Sub Part Revision field.
- In the Planned Quantity field, enter the quantity
of material (i.e., the selected part) that is to be used during execution of
the task card.
- If the part will not be used every time the task card is executed, enter the probability
(as a percentage) of the part being needed in the Probability field.
- Save the record (F12).
Note: You can also define materials for an existing task card in the following windows:
- Task Cards per Maintenance Code/Material
Usage
- Modification Details/Execution Type Info/Material Usage
- Condition Monitoring
Program/Condition Category Info/Material Usage
- Task Cards per Fault Function/Material
Usage
- Serial Part Revision/Life Limit/Material
Usage
- Post Maintenance Check Definition/Part
Revision Info/Material Usage
Use the following procedure to define the material to
be used on a subtask:
- Open the Subtask window.
- Populate (F2) or query (F3) for the desired
subtask.
- Click the Material List tab and
create a new record (F5).
- Specify the sub part number and sub part revision
of the material. Use the List of Values in the relevant fields to select
valid values. You can also directly select the manufacturer's part number
for the material, thereby retrieving the sub part revision.
- Enter the planned quantity of material.
- Save the information (F12).