Assign Parts to Modification
Explanation
This activity is used to define allowed part numbers for a
modification. Here you may also define if the modification should be performed
at the next visit to the workshop or when the next interval based maintenance is
performed. The modification may be performed at the next visit to the workshop
or when the next interval based maintenance is performed instead of defining a
terminating action interval.
Prerequisites
- Part numbers must be defined.
- A modification must be defined.
- To select a maintenance code for the Next Interval
Maintenance, the maintenance code has to be set up in a maintenance plan
with an interval, and the maintenance program has to be in the Active
status. See
Define
Maintenance Code for more information.
System Effects
- When you define a part number and the assignment type
registered on the modification is set to By Serial Range, all part revisions for
serials with the defined part number are automatically created as
assigned part revisions in Define
Modification/Assign Part Revisions.
- If you define a part number and the assignment type registered on the modification is set to
By Revision All Serials and there exists
only serials of one part
revision, the part revision
is automatically created as an assigned part revision in
Define
Modification/Assign Part Revisions. If there exists serials of more than one part revision, the part
revisions must be entered manually.
- If you select the Decompliance Allowed check box, the
modification can be decomplied with.
- If you select the Next Visit In Workshop check box, a pending
maintenance event
is automatically created for each assigned serial as
soon as the modification's status is changed to Active. When distributing
any kind of event to a work order, the pending event for this modification is automatically
added to the same maintenance order or work order.
- If you enter a maintenance code in the Next
Interval Maintenance field,
a pending event is automatically created for each assigned serial as
soon as the modification's status is changed to Active. The modification
event
is automatically added to the same
maintenance order as the interval based maintenance event when assigning the
event to work order.
- If you select the Last Due Date Trigger Execution check box on the
part number, the latest due date is selected instead of the earliest due
date when the modification due calculation is run. By default, the earliest
due date is selected.
Window
Define
Modification
Related Window Descriptions
Define
Modification/Assign Parts
Serial Parts
Task Card/Connect Mx Event Codes/Maintenance Code
Procedure
- Query the modification revision you want to register parts for in the
Define Modification window.
- Click the
Assign Parts tab.
- Enter the Part Number that this modification is called out on or
applicable for.
- By default, the Decompliance Allowed check box is selected.
Deselect this check box if you do not want decompliance enabled for the
modification.
- Determine if you want the Next Visit In Workshop, Next Interval
Maintenance, and Last Due Date Trigger Execution check
boxes to be valid for the parts assigned to the modification. Select
or deselect the check boxes as required.
- Click Save.