Connect Technical Class to Design Object/Design Part
Explanation
This activity is used to add a technical class to or modify the technical
class of a design object or design part. The technical class can be connected to
the design object or design part class and become applicable for a design object
or design part created from those classes, or it can be connected directly to a
design object or design part. The latter is the case in this activity.
Prerequisites
- A technical class should be defined.
- A design object or design part should exist.
System Effects
- A technical class will be connected to and applicable for the design
object or design part and this technical class definition overrides the
technical class definition on the design object or design part class, if
any.
Window
Design Object
Design Objects
Design Part
Design Parts
Related Window Descriptions
Design Object
Design Objects
Design Part
Design Parts
Procedure
Use this procedure to connect a technical class for a design
object or design part using the
Requirements tab
on the Design Object or
Design Part windows:
- Open either the
Design Object or
the
Design Part
window, depending on if you want to connect the technical class to a design
object or design part.
- Search for the required design object or design part record.
- Click the
Requirements tab.
- Create a new record.
- In the Technical Class field, enter the technical class to be
connected. Use the List of Values to select a suitable technical
class.
- Click Save.
Use this procedure to define the technical class for a design
object or design part using Attachments:
- Open either one of the following windows depending on the object or
design part for which you want to connect the technical class:
Design Object
Design Objects
Design Part
Design Parts
- Search for the required object or design part record. If more than one
record is displayed, select the required record.
- Click Attachments and then click Characteristics.
- Right-click and click Select Technical Class.
- Click OK.